If you leave the filter in too long, you’ll start to notice issues like your ice tastes bad. Sometimes, the filter will get so clogged that the ice maker won’t make ice at all.
Refrigerator Water Filter Helps remove contaminants, including harmful lead, arsenic, and mercury, from tap water before it reaches your glass.
Failure to install a filter could permit unabsorbed contaminants and bacteria enter your body, as well as leave a bad taste and smell in your refrigerator.
If you use your refirgerator without the water filter that would allow impurities build-up that can cause damage to your refrigerator.
The water skips the filtration step and goes straight to the ice maker. Some refrigerators require an extra part, called a bypass plug, for the water to skip the filtration step.
Whether or not the refrigerator will function without a filter depends upon its specifics. If the refrigerator does not have a bypass plug and the filter housing can be closed with the filter cap, a filter is not needed. If the refrigerator has a bypass plug, it must be properly installed for the water and ice dispensers to work without a filter. Check your refrigerator user manual for specific information about your model and its use without a filter.
A refrigerator water filter bypass is a small plastic cap, plug, filter-shaped cartridge or even a sediment filter that removes coarse particles that “tricks” the refrigerator into thinking it has a regular filter in place (e.g. the Bosch refrigerator filter bypass).
The filter bypass will have the same end shape as your regular refrigerator filter and is attached in the same location.
Remove your existing water filter and try and use the water dispenser and ice maker.
If the water dispenser and ice maker continue to work, then your refrigerator has an inbuilt automatic bypass mode and you DO NOT need to buy a filter bypass and you can use the refrigerator without the water filter.
If your refrigerator water dispenser and ice maker don’t work, then you DO need a filter bypass to use your refrigerator without a filter.
But for your health, we don’t recommend bypassing the filter. Here, we’ll go over the importance of filters and when it’s appropriate to change one.
Leaving an old water filter in your refrigerator is often worse than having no filter at all (or adding in a bypass filter).
You will need to do this at least every 6 months, the only exception is if you already have clean fresh water from an RO or whole-house water filter system feeding into your fridge.
If you don’t change your refrigerator water filter then it can become clogged. You may begin to notice the pressure in your water dispenser or ice maker slow down or stop entirely.
Additionally, if you leave the filter in your fridge for longer than you should, you may start to get black floaty bits coming from your water dispenser or in your ice cubes. Black floaty bits are usually molds or slime that have built up and come loose from inside your filter.
Bad taste or smell. If your tap water isn’t that great and you don’t change your fridge filter, the water can start to taste or smell bad. People often say they can start to taste the chlorine or it smells like rotten eggs (sulfur smell).
If you live in an area with hard water, which is most of the United States, you may start to notice a metallic taste or a build up of scale in parts of your refrigerator. This is due to an old filter that needs replacing.
If you have a refrigerator that has a water dispenser on it and you see a message like replace filter.
It's time to replace the water filter in your refrigerator. It's an easy thing to do. Anybody can do this. I'll show you exactly how to do it here in my Whirlpool refrigerator but the concept is the same for all newer refrigerators with these water dispensers and I'm going to get into it right after this.
It's important that we keep the water clean that's running through our refrigerator that we're drinking and we need to make sure to replace the filter that comes with our refrigerators. Generally, these filters have a life time of about six months but that's going to vary depending on how much you're using this how much entertaining you do how big of a family you have you could go longer it might be a shorter amount of time.
But the refrigerators will have an indicator here. And it'll say replace filter.This comes on when it's time to get a new filter. And make sure that you get direct filter for the make and model of your refrigerator. So now I'm going to show you how we can put this refrigerator water filter in so that you can be on your way to getting cleaner water better tasting water knowing that it's safe to drink for you and your family.
The first thing that we need to do is we need to locate where the water filter is accessed. Where the water filter plugs in. In my whirlpool in my particular model it is going to be up here in the top on the right side of the top shelf.In some refrigerators It could be underneath but for this particular model it is here. Just consult your owners manual to find where your water filter lives. So the way that we remove the old water filter these you'll see an arrow down here at the bottom and it says lift up to remove. So I simply just lift up on that and it'll start to push it partially out. All you have to do is pull this out now.
Note the bevel here at the bottom and the direction and these two parts sticking out here that need to be horizontal when it goes in just note that this has to go on the bottom to go in this track so that it can fit in there and then there's actually a gap at the top you can't see it here in the video of four it's a clearing.
So that this part of the filter can be clear to go in. So let's remove the old filter and I have the new one here again.
Please make sure that your new filter and the old filter are exactly the same.You'll notice that there is a cover on here for protection.
Do not try to install with that cover on just go ahead and take that covering off. I actually tried to install it this way and it didn't go all the way in and you can actually see inside of there. The holes where these will line up with. So let's just simply slide it in should go right in and as you push it in.This door will partially start to close and then you can just close the rest of it with that door it should snap that's it. The water filter is now in the housing.
We have that replaced so that's all you got to do when replacing the water filter. So all we need to do now is we need to get a large container and then what we need to do at least a container that's going to fit in here is we need to run about four gallons of water through the system before you drink it just to get it going through the filter. Clean it out and make sure that all of the internal components of the filter are completely saturated and so that it's safe to drink. Okay so you simply run four gallons of water through the system and at first you might experience some air coming through and that's perfectly normal with a new filter just continue to run the water through and make sure to do the full four gallons so that you can be sure that the water is safe to drink for you and your family.
On my particular model it shows me how many Ounces are coming out and this container that I have is roughly about a gallon so I need to do about four of these and then once that's done. It's free and safe to drink for you and your family and that's how you replace your water filter on the refrigerator.
We have a wide ranges of water filters compatible with different refrigerator brands including LG, Whirlpool, GE and Samsung.
Fore more info, pls click the link here to check out more info: https://www.waterfilter-system.com/collections/wfs-refrigerator-water-filters
If you got any questions about the refrigerator water filter, please comment below and we love to discuss with you.
Comments will be approved before showing up.
Subcribe to Get the Biggest Discount